13/13 Dellorto Remake Carburetor Choke Rod Gilera Citta Vespa SI Bravo

This 13/13 Dellorto Remake carburetor is a high-quality aftermarket version of the popular Dellorto 13/13 carburetor. It is designed as an affordable replacement for various classic mopeds and is suitable for models including the Gilera Citta, Vespa SI and Vespa Bravo.

This version is equipped with a choke rod connection, making it suitable for models where the choke is operated by a rod through the side panels, such as the Gilera Citta.

The carburetor is supplied with a size 58 main jet. For tuning, it uses Dellorto thin 5 mm main jets. Depending on your cylinder, exhaust and air filter combination, a different jet size may be required. View the compatible jets here:

Dellorto thin 5 mm main jets

The carburetor features a 15.7 mm intake connection and is supplied with a nylon reducing sleeve that clamps securely into the intake manifold. The air filter connection measures 50 mm.

Features

• High-quality aftermarket version of the Dellorto 13/13 carburetor
• Venturi: 13 mm
• Suitable for choke rod operation
• Supplied with size 58 main jet
• Main jet type: Dellorto thin 5 mm
• Intake connection: 15.7 mm
• Includes nylon reducing sleeve
• Air filter connection: 50 mm

Installation and tuning advice

• Always verify that the installed main jet matches your engine setup.
• Use only Dellorto thin 5 mm main jets for tuning.
• When in doubt, start with a larger main jet and work down to the correct setting.
• Check for proper sealing and eliminate any air leaks after installation.
• Install the nylon reducing sleeve carefully to ensure correct carburetor alignment.

Suitable for models including

• Gilera Citta
• Vespa SI
• Vespa Bravo

Always check the intake dimensions, choke configuration and available installation space before ordering.